菲尼克斯多路復用器,GW PL ETH/UNI-BUS
多路復用器的特點,
HART傳輸模板可用于操作MACX-MCR-S-MUX HART多路復用器。
由與HART兼容的信號逆變器產生的信號傳輸到傳輸模板的連接器上
持所連接的HART現場設備的組態和診斷
使用RS-485接口通過軟件工具(如HART OPC服務器)進行通信
輔助電壓、RS-485總線和HART通道之間的電隔離
測量信號傳輸即使同時并行接入HART現場設備,也不會影響測量值的處理
使用通ART接線板對HART現場設備進行連接;
處理非Ex信號則可直接連接,若處理Ex信號則須在上行線路中使用單獨的Ex i信號隔離器連接
并通過連接器經過一個FLK傳輸到多路復用
HART transmission template can be used to operate the MACX-MCR-S-MUX HART multiplexer.
HART-compatible signal transmitted by the signal generated by the
inverter to the connector transfer template
Held HART field devices connected to the online configuration and diagnostics
using RS-485 interface via software tools (such as HART OPC server) to communicate
a PC interface can connect up to 128 HART multiplexers
through ART using the wiring board of HART field devices are connected;
When dealing with non-Ex signal can be directly connected,
if processing Ex signals shall use a separate Ex signal
And after a transmission to the multiplexer via FLK connector
菲尼克斯多路復用器,GW PL ETH/UNI-BUS
企業QQ;2880626086
手機:17302157802
聯系人;劉艷
021-39526589
網址:czhfh.cn
地 址:上海市嘉定區嘉涌路99弄
6號樓713室