概述:
with throttle spindle and turning knob mounted in subplate housing.
HYDAC needle valves with reverse flow check are equipped
When the turning knob is screwed out, the flow rate is increased
The needle valve with reverse flow check DRVP-10 is a valve
with throttle spindle and turning knob for influencing
throttle spindles; e.g. for the velocity control of loaded consumers.
the flow rate by means of an adjustable cross-section
- depending on viscosity and pressure. A check valve permits free flow
in the other direction. Qmax = 60 l/min Pmax = 350 bar
in one direction. There is free flow in the opposite direction.
Fine adjustment of the flow rate by means of specially formed
特點:
An Allen set-screw locks the setting of the knob
As an emergency drain for lowering a load
Spindle patented secured before complete loosening
For regulating the speed of loads
To release pressure from accumulator systems
For system-related damping in hydraulic circuits
minimal wear and extended service life
Optional nickel-plated version available (up to size 12)
For fine adjustment and shut-off of the flow
Choice of nine sizes ensures best possible adaptability to the system
Hardened and ground valve components to ensure
021-39526589
網址:czhfh.cn
地 址:上海市嘉定區嘉涌路99弄
6號樓713室