CQM1-PA206,銷售OMRON小型安全限位開關

則可能會導致油或水浸入開關內部。

（開關的保護結構為IP67，即放置水中一定時間后會

發生進在完成接線后以及使用開關前，請務必安裝外蓋。此外，請勿在

外蓋打開的情況下接通開關電源。否則可能導致觸電。

請勿同時進行2個或2個以上的標準負載（AC250V，3A）電路的

開關。否則可能導致絕緣功能下降

? 使用M4螺釘和彈簧墊圈安裝開關，按照正確轉矩緊固螺釘。

? 為了安全起見，請使用不易取下的螺釘，或者具有同等效果的安

? 如下所示，可以使用2個高度為4.8mm以下，直徑為4 mm的螺

栓，插入開關下部的孔內，以便采用4點固定更牢固地安裝。

? 確保擋塊以正確角度接觸傳動桿。

如果斜向地向開關的傳動桿（滾珠）施加負載，會導致傳動桿及

安全注意事項對如何安全使用本產品的補充說明。

對如何防止操作失敗、故障和產品性

by Omron). Omron disclaims all other warranties, express or implied.

(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT

NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE

CQM1-PA206,銷售OMRON小型安全限位開關

PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL

SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE.

Omron further disclaims all warranties and responsibility 

of any type for claims or expenses based on infringement by the Products

or otherwise of any intellectual property right. (c) Buyer Remedy.

 Omron’s sole obligation hereunder shall be, at Omron’s election,

to (i) replace (in the form originally shipped with Buyer responsible 

for labor charges for removal or replacement thereof) the

non-complying Product, (ii) repair the non-complying Product, or (iii)

 repay or credit Buyer an amount equal to the purchase price

of the non-complying Product; provided that in no event shall Omron be 

responsible for warranty, repair, indemnity or any other上。

CQM1-PA206,銷售OMRON小型安全限位開關